Jump to content

Berkeley r-commands

From Wikipedia, the free encyclopedia
Berkeley r-commands
Developer(s)Computer Systems Research Group at the University of California, Berkeley
Initial releaseJune 1981; 43 years ago (1981-06)
Operating systemUnix and Unix-like
TypeCommand suite
LicenseBSD
Internet protocol suite
Application layer
Transport layer
Internet layer
Link layer

The Berkeley r-commands are a suite of computer programs designed to enable users of one Unix system to log in or issue commands to another Unix computer via TCP/IP computer network.[1] The r-commands were developed in 1982 by the Computer Systems Research Group at the University of California, Berkeley, based on an early implementation of TCP/IP (the protocol stack of the Internet).[2]

The CSRG incorporated the r-commands into their Unix operating system, the Berkeley Software Distribution (BSD). The r-commands premiered in BSD v4.1.[2] Among the programs in the suite are: rcp (remote copy), rexec (remote execution), rlogin (remote login), rsh (remote shell), rstat, ruptime, and rwho (remote who).[2][3]

The r-commands were a significant innovation, and became de facto standards for Unix operating systems.[4][5] With wider public adoption of the Internet, their inherent security vulnerabilities became a problem,[6] and beginning with the development of Secure Shell protocols and applications in 1995, its adoption entirely supplanted the deployment and use of r-commands (and Telnet) on networked systems.[7]

Overview
Service Port Transport Refs
Client Daemon
rcp rshd 514 TCP
rexec rexecd 512 TCP [8]
rlogin rlogind 513 TCP [9]
rsh rshd 514 TCP
rstat rstatd UDP
ruptime rwhod 513 UDP [10]
rwho [9][10]

Protocol

[edit]

The original Berkeley package that provides rlogin also features rcp (remote-copy, allowing files to be copied over the network) and rsh (remote-shell, allowing commands to be run on a remote machine without the user logging into it).

As an example, the protocol is as follows:[11]

Client:
<null>
user name on the client<null>
user name on the server<null>
terminal type/terminal baud rate<null>

Server:

The server would check that the user should have access. If so, it returns a message with nothing in it (not even a null character), meaning the connection is established. For example:

Client:
<null>
bostic<null>
kbostic<null>
vt100/9600<null>

Server:

Both rlogin and rsh share the /etc/hosts.equiv (applies to all users on the server) and $HOME/.rhosts (applies to only the user that puts the file in its home folder) access-control scheme, although they connect to different daemons. rlogin connects to rlogind, while rsh connects to rshd. hosts.equiv and .rhosts uses the same format. The following shows some aspects of the format:[12][13]

host1
host2 user_a
-host3
+@group1 -user_b
-@group2

This allows all users from host1 to login, user_a from host2 to login, no users from host3, all users on group1 except user_b, and no users on group2.

Commands

[edit]

rlogin

[edit]
See also: Telnet

rlogin enables a user to log in on another server via computer network, using TCP network port 513.

rlogin is also the name of the application layer protocol used by the software, part of the TCP/IP protocol suite. Authenticated users can act as if they were physically present at the computer. RFC 1282, in which it was defined, states: "The rlogin facility provides a remote-echoed, locally flow-controlled virtual terminal with proper flushing of output." rlogin communicates with a daemon, rlogind, on the remote host. rlogin is similar to the Telnet command, but is not as customizable and is able to connect only to Unix-like hosts.

rsh

[edit]
Further information: Remote Shell

rsh opens a shell on a remote computer without a login procedure. Once connected, the user can execute commands on the remote computer through the shell's command-line interface. rsh passes input and output through the standard streams, and it sends standard output to the user's console. Over the network, standard input and standard out flow through TCP port 514, while Standard Error flows through a different TCP port, which the rsh daemon (rshd) opens.[14]

rexec

[edit]

Like rsh, rexec enables the user to run shell commands on a remote computer. However, unlike the rsh server, the rexec server (rexecd) requires login: it authenticates users by reading the username and password (unencrypted) from the network socket.[15] rexec uses TCP port 512.

rcp

[edit]

rcp can copy a file or directory from the local system to a remote system, from a remote system to the local system, or from one remote system to another.[16] The command line arguments of cp and rcp are similar, but in rcp remote files are prefixed with the name of the remote system: 

rcp file.txt subdomain.domain:~/home/foo/file.txt

As with the Unix copy command cp, rcp overwrites an existing file of the same name in the target; unlike cp, it provides no mechanism for warning the user before overwriting the target file.[16] Like rsh, rcp uses TCP port 514.[17]

rwho

[edit]

Just as the who command lists the users who are logged in to the local Unix system, rwho lists those users who are logged into all multi-user Unix systems on the local network.[18] rwho's daemon, rwhod, maintains a database of the status of Unix systems on the local network. The daemon and its database are also used by the ruptime program.[19]

rstat

[edit]

rstat returns performance statistics from the kernel.

ruptime

[edit]

Just as the uptime command shows how long a Unix system has been running since the last restart, ruptime requests a status report from all computers on the local network. It then returns the uptime report. If a computer did not respond within the time limit, then ruptime reports that the system is down.[20] This information is tracked and stored by the daemon rwhod, which is also used by the rwho command.[19]

Security

[edit]

Those r-commands which involve user authentication (rcp, rexec, rlogin, and rsh) share several serious security vulnerabilities:

  • All information, including passwords, is transmitted unencrypted (making it vulnerable to interception).
  • The .rlogin (or .rhosts) file is easy to misuse. They are designed to allow logins without a password, but their reliance on remote usernames, hostnames, and IP addresses is exploitable. For this reason many corporate system administrators prohibit .rhosts files, and actively scrutinize their networks for offenders.
  • The protocol partly relies on the remote party's rlogin client to provide information honestly, including source port and source host name. A malicious client can forge this and gain access, as the rlogin protocol has no means of authenticating the client is running on a trusted machine. It also cannot check if the requesting client on a trusted machine is the real rlogin client, meaning that malicious programs may pretend to be a standard-conforming rlogin client by using the same protocols.
  • The common practice of mounting users' home directories via Network File System exposes rlogin to attack by means of fake .rhosts files - this means that any of its security faults automatically plague rlogin.

Due to these problems, the r-commands fell into relative disuse (with many Unix and Linux distributions no longer including them by default). Many networks that formerly relied on rlogin and telnet have replaced them with SSH and its rlogin-equivalent slogin.[21][22]

See also

[edit]

Notes

[edit]
  1. ^ Horwitz, Jeff (2003) [2002]. "Using the Berkeley r-commands Without a Password". Unix System Management: Primer Plus. Sams Publishing. p. 339. ISBN 978-0-672-32372-0. Retrieved 2018-03-04 – via Google Books.
  2. ^ a b c McKusick, Marshall Kirk (1999). "Twenty Years of Berkeley Unix: From AT&T-Owned to Freely Redistributable". Open Sources: Voices from the Open Source Revolution. O'Reilly & Associates. Section: "4.2BSD". ISBN 978-1-56592-582-3. Retrieved 2018-03-03.
  3. ^ Pyles, James; Carrell, Jeffrey L.; Tittel, Ed (2017). "Which IP Services Are Most Vulnerable?". Guide to TCP/IP: IPv6 and IPv4 (5th ed.). Cengage Learning. p. 659. ISBN 978-1-305-94695-8 – via Google Books.
  4. ^ Casad (2008), p. 346
  5. ^ Negus, Christopher (2004-07-02). "About "r" Commands". Red Hat Fedora Linux 2 Bible. Wiley. ISBN 0-7645-5745-9. OCLC 441918216. Retrieved 2018-03-04.
  6. ^ "A Case Study of Using a Secure Network Layer Protocol". CiteSeerX 10.1.1.178.8497.
  7. ^ Nicholas Rosasco; David Larochelle. "How and Why More Secure Technologies Succeed in Legacy Markets: Lessons from the Success of SSH" (Conference Paper). Harvard University. doi:10.1007/1-4020-8090-5_18. S2CID 19035681. Retrieved 13 April 2023.
  8. ^ "REXEC command—Execute a command on the remote host and receive the results on your local host". z/OS Communications Server: IP User's Guide and Commands. 2013 [1990]. Retrieved 2018-03-04.
  9. ^ a b "More on Ports". FreeBSD Network Administrators Guide. Retrieved 2018-03-04.
  10. ^ a b Casad (2008), pp. 350–51
  11. ^ Kantor, Brian (December 1991). BSD Rlogin (Report). Internet Engineering Task Force.
  12. ^ ".rhosts File Format for TCP/IP". www.ibm.com. Retrieved 2023-11-29.
  13. ^ "hosts.equiv File Format for TCP/IP". www.ibm.com. Retrieved 2023-11-29.
  14. ^ Edwards, Wade; Lancaster, Tom; Quinn, Eric; Rohm, Jason; Tow, Bryant (2004). CCSP: Secure PIX and Secure VPN Study Guide. Sybex. p. 154. ISBN 0-7821-4287-7. Retrieved 2018-03-07 – via Google Books.
  15. ^ "rexecd(8)". manpagez.com. Retrieved 2018-03-03.
  16. ^ a b Farrell, Phillip (3 August 2004). "rcp". earthsci.stanford.edu. Stanford University School of Earth, Energy & Environmental Sciences. Archived from the original on 2021-02-07. Retrieved 2018-03-06.
  17. ^ "Rlogin, RSH, and RCP". SourceDaddy. Retrieved 2018-02-18.
  18. ^ "rwho (1) - Linux Man Pages". Retrieved 2018-03-07.
  19. ^ a b "rwhod (8) - Linux Man Pages". Retrieved 2018-03-07.
  20. ^ "ruptime (1) - Linux Man Pages". SysTutorials. Retrieved 2018-03-07.
  21. ^ Sobell, Mark (2010). A Practical Guide to Linux Commands, Editors, and Shell Programming. Pearson Education, Inc. ISBN 978-0-13-136736-4.
  22. ^ "Unix job control command list". Indiana University. Retrieved 20 December 2014.

References

[edit]

Further reading

[edit]
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Berkeley_r-commands&oldid=1187434056"