Jump to content

Hemicellulose

From Wikipedia, the free encyclopedia

A hemicellulose (also known as polyose) is one of a number of heteropolymers (matrix polysaccharides), such as arabinoxylans, present along with cellulose in almost all terrestrial plant cell walls.[1] Cellulose is crystalline, strong, and resistant to hydrolysis. Hemicelluloses are branched, shorter in length than cellulose, and also show a propensity to crystallize.[2] They can be hydrolyzed by dilute acid or base as well as a myriad of hemicellulase enzymes.

Most common molecular motif of hemicellulose

Composition

[edit]

Diverse kinds of hemicelluloses are known. Important examples include xylan, glucuronoxylan, arabinoxylan, glucomannan, and xyloglucan.

Hemicelluloses are polysaccharides often associated with cellulose, but with distinct compositions and structures. Whereas cellulose is derived exclusively from glucose, hemicelluloses are composed of diverse sugars, and can include the five-carbon sugars xylose and arabinose, the six-carbon sugars glucose, mannose and galactose, and the six-carbon deoxy sugar rhamnose. Hemicelluloses contain most of the D-pentose sugars, and occasionally small amounts of L-sugars as well. Xylose is in most cases the sugar monomer present in the largest amount, although in softwoods mannose can be the most abundant sugar. Not only regular sugars can be found in hemicellulose, but also their acidified forms, for instance glucuronic acid and galacturonic acid can be present.[3][4]

Structural comparison to cellulose

[edit]

Unlike cellulose, hemicelluloses consist of shorter chains – 500–3,000 sugar units. In contrast, each polymer of cellulose comprises 7,000–15,000 glucose molecules.[5] In addition, hemicelluloses may be branched polymers, while cellulose is unbranched. Hemicelluloses are embedded in the cell walls of plants, sometimes in chains that form a 'ground' – they bind with pectin to cellulose to form a network of cross-linked fibres.[citation needed]

Section of a cell wall; hemicellulose in green

Based on the structural difference, like backbone linkages and side groups, as well as other factors, like abundance and distributions in plants, hemicelluloses can be categorized into four groups as following:[4] 1) xylans, 2) mannans; 3) mixed linkage β-glucans; 4) xyloglucans.

Xylans

[edit]

Xylans usually consist of a backbone of β-(1→4)-linked xylose residues and can be further divided into homoxylans and heteroxylans. Homoxylans have a backbone of D-xylopyranose residues linked by β(1→4) glycosidic linkages. Homoxylans mainly have structural functions. Heteroxylans such as glucuronoxylans, glucuronoarabinoxylans, and complex heteroxylans, have a backbone of D-xylopyranose and short carbohydrate branches. For example, glucuronoxylan has a substitution with α-(1→2)-linked glucuronosyl and 4-O-methyl glucuronosyl residues. Arabinoxylans and glucuronoarabinoxylans contain arabinose residues attached to the backbone[6]

Xylan in hardwood[7]

Mannans

[edit]

The mannan-type hemicellulose can be classified into two types based on their main chain difference, galactomannans and glucomannans. Galactomannans have only β-(1→4) linked D-mannopyranose residues in linear chains. Glucomannans consist of both β-(1→4) linked D-mannopyranose and β-(1→4) linked D-glucopyranose residues in the main chains. As for the side chains, D-galactopyranose residues tend to be 6-linked to both types as the single side chains with various amount.[1]

Mixed linkage β-glucans

[edit]

The conformation of the mixed linkage glucan chains usually contains blocks of β-(1→4) D-Glucopyranose separated by single β-(1→3) D-Glucopyranose. The population of β-(1→4) and β-(1→3) are about 70% and 30%. These glucans primarily consist of cellotriosyl (C18H32O16) and cellotraosyl (C24H42O21)segments in random order. There are some study show the molar ratio of cellotriosyl/cellotraosyl for oat (2.1-2.4), barley (2.8-3.3), and wheat (4.2-4.5).[1][5]

Beta-D-glucopyranose with carbon positions.

Xyloglucans

[edit]

Xyloglucans have a backbone similar to cellulose with α-D-xylopyranose residues at position 6. To better describe different side chains, a single letter code notation is used for each side chain type. G -- unbranched Glc residue; X -- α-d-Xyl-(1→6)-Glc. L -- β-Gal , S -- α-l-Araf, F-- α-l-Fuc. These are the most common side chains.[5]

The two most common types of xyloglucans in plant cell walls are identified as XXXG and XXGG.[1]

Biosynthesis

[edit]

Hemicelluloses are synthesised from sugar nucleotides in the cell's Golgi apparatus.[8] Two models explain their synthesis: 1) a '2 component model' where modification occurs at two transmembrane proteins, and 2) a '1 component model' where modification occurs only at one transmembrane protein. After synthesis, hemicelluloses are transported to the plasma membrane via Golgi vesicles.

Each kind of hemicellulose is biosynthesized by specialized enzymes.[8][9]

Mannan chain backbones are synthesized by cellulose synthase-like protein family A (CSLA) and possibly enzymes in cellulose synthase-like protein family D (CSLD).[8][9] Mannan synthase, a particular enzyme in CSLA, is responsible for the addition of mannose units to the backbone.[8][9] The galactose side-chains of some mannans are added by galactomannan galactosyltransferase.[8][9] Acetylation of mannans is mediated by a mannan O-acetyltransferase, however, this enzyme has not been definitively identified.[9]

Xyloglucan backbone synthesis is mediated by cellulose synthase-like protein family C (CSLC), particularly glucan synthase, which adds glucose units to the chain.[8][9] Backbone synthesis of xyloglucan is also mediated in some way by xylosyltransferase, but this mechanism is separate to its transferase function and remains unclear.[9] Xylosyltransferase in its transferase function is, however, utilized for the addition of xylose to the side-chain.[8][9] Other enzymes utilized for side-chain synthesis of xyloglucan include galactosyltransferase (which is responsible for the addition of [galactose and of which two different forms are utilized), fucosyltransferase (which is responsible for the addition of fucose), and acetyltransferase (which is responsible for acetylation).[8][9]

Xylan backbone synthesis, unlike that of the other hemicelluloses, is not mediated by any cellulose synthase-like proteins.[9] Instead, xylan synthase is responsible for backbone synthesis, facilitating the addition of xylose.[9] Several genes for xylan synthases have been identified.[9] Several other enzymes are utilized for the addition and modification of the side-chain units of xylan, including glucuronosyltransferase (which adds [glucuronic acid units), xylosyltransferase (which adds additional xylose units), arabinosyltransferase (which adds arabinose), methyltransferase (responsible for methylation), and acetyltransferase] (responsible for acetylation).[9] Given that mixed-linkage glucan is a non-branched homopolymer of glucose, there is no side-chain synthesis, only the addition of glucose to the backbone in two linkages, β1-3 and β1-4.[9] Backbone synthesis is mediated by enzymes in cellulose synthase-like protein families F and H (CSLF and CSLH), specifically glucan synthase.[8][9] Several forms of glucan synthase from CSLF and CSLH have been identified.[8][9] All of them are responsible for addition of glucose to the backbone and all are capable of producing both β1-3 and β1-4 linkages, however, it is unknown how much each specific enzyme contributes to the distribution of β1-3 and β1-4 linkages.[8][9]

Applications

[edit]

In the sulfite pulp process the hemicellulose is largely hydrolysed by the acid pulping liquor ending up in the brown liquor where the fermentable hexose sugars (around 2%) can be used for producing ethanol. This process was primarily applied to calcium sulfite brown liquors.[10]

Arabinogalactans can be used as emulsifiers, stabilizers and binders according to the Federal Food, Drug and Cosmetic Act. Arabinogalactans can also be used as bonding agent in sweeteners.[11]

  • Xylan

The films based on xylan show low oxygen permeability and thus are of potential interest as packaging for oxygen-sensitive products.[12]

A Petri dish with bacterial colonies on an agar-based growth medium

Agar is used in making jellies and puddings. It is also growth medium with other nutrients for microorganisms.[13]

Curdlan can be used in fat replacement to produce diet food while having a taste and a mouth feel of real fat containing products.[13]

b-glucans have an important role in food supplement while b-glucans are also promising in health-related issues, especially in immune reactions and the treatment of cancer.[14]

Xanthan, with other polysaccharides can form gels that have high solution viscosity which can be used in the oil industry to thicken drilling mud. In the food industry, xanthan is used in products such as dressings and sauces.[15]

Alginate is an important role in the development of antimicrobial textiles due to its characteristics of environmental friendliness, and high industrialization level as a sustainable biopolymer.[16]

Natural functions

[edit]
Hemicellulose contribution to structural support within plant cells

As a polysaccharide compound in plant cell walls similar to cellulose, hemicellulose helps cellulose in the strengthening of plant cell walls.[6] Hemicellulose interacts with the cellulose by providing cross-linking of cellulose microfibrils: hemicellulose will search for voids in the cell wall during its formation and provide support around cellulose fibrils in order to equip the cell wall with the maximum possible strength it can provide.[6] Hemicellulose dominates the middle lamella of the plant cell, unlike cellulose which is primarily found in the secondary layers. This allows for hemicellulose to provide middle-ground support for the cellulose on the outer layers of the plant cell. In few cell walls, hemicellulose will also interact with lignin to provide structural tissue support of more vascular plants.[3][17]

Extraction

[edit]

There are many ways to obtain hemicellulose; all of these rely on extraction methods through hardwood or softwood trees milled into smaller samples. In hardwoods the main hemicellulose extract is glucuronoxlyan (acetylated xylans), while galactoglucomannan is found in softwoods.[18][19] Prior to extraction the wood typically must be milled into wood chips of various sizes depending on the reactor used. Following this, a hot water extraction process, also known as autohydrolysis or hydrothermal treatment, is utilized with the addition of acids and bases to change the yield size and properties.[18][19] The main advantage to hot water extraction is that it offers a method where the only chemical that is needed is water, making this environmentally friendly and cheap.[20]

The goal of hot water treatment is to remove as much hemicellulose from the wood as possible. This is done through the hydrolysis of the hemicellulose to achieve smaller oligomers and xylose. Xylose when dehydrated becomes furfural.[21] When xylose and furfural[check spelling] are the goal, acid catalysts, such as formic acid, are added to increase the transition of polysaccharide to monosaccharides. This catalyst also has been shown to also utilize a solvent effect to be aid the reaction.[21]

One method of pretreatment is to soak the wood with diluted acids (with concentrations around 4%). This converts the hemicellulose into monosaccharides. When pretreatment is done with bases (for instance sodium or potassium hydroxide) this destroys the structure of the lignin.[19] This changes the structure from crystalline to amorphous. Hydrothermal pretreatment is another method.[further explanation needed] This offers advantages such as no toxic or corrosive solvents are needed, nor are special reactors, and no extra costs to dispose of hazardous chemicals.[18]

The hot water extraction process is done in batch reactors, semi-continuous reactors, or slurry continuous reactors. For batch and semi-continuous reactors wood samples can be used in conditions such as chips or pellets while a slurry reactor must have particles as small as 200 to 300 micrometers.[19] While the particle size decreases the yield production decreases as well.[22] This is due to the increase of cellulose.[citation needed]

The hot water process is operated at a temperature range of 160 to 240 degrees Celsius in order to maintain the liquid phase. This is done above the normal boiling point of water to increase the solubilization of the hemicellulose and the depolymerization of polysaccharides.[21] This process can take several minutes to several hours depending on the temperature and pH of the system.[19] Higher temperatures paired with higher extraction times lead to higher yields. A maximum yield is obtained at a pH of 3.5.[18] If below, the extraction yield exponentially decreases. In order to control pH, sodium bicarbonate is generally added.[18] The sodium bicarbonate inhibits the autolysis of acetyl groups as well as inhibiting glycosyl bonds. Depending on the temperature and time the hemicellulose can be further converted into oligomers, monomers and lignin.[18]

See also

[edit]

References

[edit]
  1. ^ a b c d Scheller HV, Ulvskov P.Hemicelluloses. // Annu Rev Plant Biol. 2010;61:263-89. doi: 10.1146/annurev-arplant-042809-112315.
  2. ^ Smith, Peter J.; Curry, Thomas M.; Yang, Jeong-Yeh; Barnes, William J.; Ziegler, Samantha J.; Mittal, Ashutosh; Moremen, Kelley W.; York, William S.; Bomble, Yannick J.; Peña, Maria J.; Urbanowicz, Breeanna R. (2022-07-13). "Enzymatic Synthesis of Xylan Microparticles with Tunable Morphologies". ACS Materials Au. 2 (4): 440–452. doi:10.1021/acsmaterialsau.2c00006. ISSN 2694-2461. PMC 9284610. PMID 35856073.
  3. ^ a b Ebringerová, Anna; Hromádková, Zdenka; Heinze, Thomas (2005), Heinze, Thomas (ed.), "Hemicellulose", Polysaccharides I: Structure, Characterization and Use, Advances in Polymer Science, Springer, pp. 1–67, doi:10.1007/b136816, ISBN 978-3-540-31583-4
  4. ^ a b Heinze, Thomas (2005). Polysaccharides I : structure, characterisation and use. Berlin: Springer. ISBN 978-3-540-31583-4. OCLC 262681325.
  5. ^ a b c Gibson LJ (2013). "The hierarchical structure and mechanics of plant materials". Journal of the Royal Society Interface. 9 (76): 2749–2766. doi:10.1098/rsif.2012.0341. PMC 3479918. PMID 22874093.
  6. ^ a b c Scheller, Henrik Vibe; Ulvskov, Peter (2010-06-02). "Hemicelluloses". Annual Review of Plant Biology. 61 (1): 263–289. doi:10.1146/annurev-arplant-042809-112315. ISSN 1543-5008. PMID 20192742.
  7. ^ Nimz, Horst H; Schmitt, Uwe; Schwab, Eckart; Wittmann, Otto; Wolf, Franz (2000-06-15), "Wood", in Wiley-VCH Verlag GmbH & Co. KGaA (ed.), Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH Verlag GmbH & Co. KGaA, pp. a28_305, doi:10.1002/14356007.a28_305, ISBN 978-3-527-30673-2
  8. ^ a b c d e f g h i j k Zhu, Xiaoyu; Xin, Xiaoran; Gu, Ying (2019), Cohen, Ephraim; Merzendorfer, Hans (eds.), "Cellulose and Hemicellulose Synthesis and Their Regulation in Plant Cells", Extracellular Sugar-Based Biopolymers Matrices, vol. 12, Springer International Publishing, pp. 303–353, doi:10.1007/978-3-030-12919-4_7, ISBN 978-3-030-12918-7, S2CID 198238237
  9. ^ a b c d e f g h i j k l m n o p q Pauly, Markus; Gille, Sascha; Liu, Lifeng; Mansoori, Nasim; de Souza, Amancio; Schultink, Alex; Xiong, Guangyan (2013). "Hemicellulose biosynthesis". Planta. 238 (4): 627–642. Bibcode:2013Plant.238..627P. doi:10.1007/s00425-013-1921-1. ISSN 0032-0935. PMID 23801299. S2CID 17501948.
  10. ^ "Sulfite Process - an overview | ScienceDirect Topics". www.sciencedirect.com. Retrieved 2022-09-08.
  11. ^ Whistler, R. L. (1993). Hemicelluloses. In Industrial Gums (pp. 295–308). Elsevier. https://doi.org/10.1016/b978-0-08-092654-4.50015-2
  12. ^ Gröndahl, M., & Gatenholm, P. (2007). Oxygen Barrier Films Based on Xylans Isolated from Biomass. In ACS Symposium Series (pp. 137–152). American Chemical Society. https://doi.org/10.1021/bk-2007-0954.ch009
  13. ^ a b Spiridon, I., & Popa, V. I. (2008). Hemicelluloses: Major Sources, Properties and Applications. In Monomers, Polymers and Composites from Renewable Resources (pp. 289–304). Elsevier. https://doi.org/10.1016/b978-0-08-045316-3.00013-2
  14. ^ Vetvicka, V., Vannucci, L., Sima, P., & Richter, J. (2019). Beta Glucan: Supplement or Drug? From Laboratory to Clinical Trials. Molecules, 24(7), 1251. https://doi.org/10.3390/molecules24071251
  15. ^ Navarrete, R. C., Himes, R. E., & Seheult, J. M. (2000). Applications of Xanthan Gum in Fluid-Loss Control and Related Formation Damage. SPE Permian Basin Oil and Gas Recovery Conference. SPE Permian Basin Oil and Gas Recovery Conference. https://doi.org/10.2118/59535-ms
  16. ^ Li, J., He, J., & Huang, Y. (2017). Role of alginate in antibacterial finishing of textiles. International Journal of Biological Macromolecules, 94, 466–473. https://doi.org/10.1016/j.ijbiomac.2016.10.054
  17. ^ Plaza, Merichel; Turner, Charlotta (2015). "Pressurized hot water extraction of bioactives". Trends in Analytical Chemistry. 71: 39–54. doi:10.1016/j.trac.2015.02.022.
  18. ^ a b c d e f Gallina, Gianluca; Cabeza, Álvaro; Grénman, Henrik; Biasi, Pierdomenico; García-Serna, Juan; Salmi, Tapio (2018-03-01). "Hemicellulose extraction by hot pressurized water pretreatment at 160°C for 10 different woods: Yield and molecular weight". The Journal of Supercritical Fluids. Biomass Fractionation by Subcritical and Supercritical Water. 133: 716–725. doi:10.1016/j.supflu.2017.10.001. ISSN 0896-8446.
  19. ^ a b c d e Li Z, Qin M, Xu C, and Chen X (2013). "Hot water extraction of hemicelluloses from aspen wood chips of different sizes :: BioResources". bioresources.cnr.ncsu.edu. Retrieved 2020-04-24.{{cite web}}: CS1 maint: multiple names: authors list (link)
  20. ^ Gianluca Gallinaa Álvaro Cabezaa Henrik Grénmanbc Pierdomenico Biasibd Juan García-Sernaa Tapio Salmi (March 2018). "Hemicellulose extraction by hot pressurized water pretreatment at 160 °C for 10 different woods: Yield and molecular weight" (PDF). The Journal of Supercritical Fluids. 133 (Part 2): 716–725. doi:10.1016/j.supflu.2017.10.001. Retrieved 7 October 2017.
  21. ^ a b c Tunc, M. Sefik; van Heiningen, Adriaan R. P. (2008-09-17). "Hemicellulose Extraction of Mixed Southern Hardwood with Water at 150 °C: Effect of Time". Industrial & Engineering Chemistry Research. 47 (18): 7031–7037. doi:10.1021/ie8007105. ISSN 0888-5885.
  22. ^ Ayrilmis N, Kwon J, Han T (October 2017). "Effect of Wood Chip Size on Hemicellulose Extraction and Technological Properties of Flakeboard". Turkish Journal of Agriculture & Forestry. 41: 331–337. doi:10.3906/tar-1704-63.{{cite journal}}: CS1 maint: multiple names: authors list (link)
[edit]
Retrieved from "https://en.wikipedia.org/w/index.php?title=Hemicellulose&oldid=1253562285"